Introduction:

This machine line is used to make wood chopsticks from wood boards.The various types of available round timber , square timber sand small wood shall be process into the dryer square wood board length of 500mm , width of 60mm, thickness of 32-34mm , which can be used to make the chopsticks by our machine line , then you can put the materials of wood board of length:500mm width 60mm thickness 32-34mm into our following 1 to 5 machines to process into chopsticks.The usual chopstick size is: diameter of 5.5mm length less than: 240mm, and also we can make the chopstick according the size client requirements.

Production process: wood dissection machine →wood set-size machine→wood chopsticks shaping machine →chopsticks sharpen machine → polishing machine→knife sharpening machine→ chopsticks packing machine

 

Advantage:

1.The whole line with capacity 100,000 pairs per 8 hours,needs 3-4 workers. 

2.One M3 raw wood can make 55,000 pairs chopsticks(dia 5.0mm,210mm length).

3. Multi functional. The production line can make square incense stick , round incense 

stick, bamboo round chopstick, bamboo stick.

4. As to the incense stick , it can produce the many kinds of diameters of stick as your 

demands.

5.High efficient and save manual labour, the entire line just needs 3-4 persons.

6.Our machines can use the leftover materials from Wooden furniture factory and Wooden crafts factory or undersized tree to produce different specification round chopsticks .